Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

11.06.2025 15:45

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

There are three different concepts here that are getting confused.

It also is a device that limits the change in current flow.

nine

Switch 2 quietly makes shiny hunting in Pokémon Scarlet and Violet way better - Polygon

This is where this question deviates from being a 'generic' question, and becomes more specific.

So, the voltage could go up to 500 volts, and the fuse will not open up.

The MOV will conduct when the voltage exceeds 50% of line voltage.

Poll: Are You Happy with Your PS Plus Essential Games for June 2025? - Push Square

2024–10–14 [Omar Gharbi Omar Gharbi ]

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

iFixit Says Switch 2 Is Probably Still Drift Prone - WIRED

The third is lightning and “how it gets conducted into a home.”

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

2024–10–16 [ OO OLAOYE OYEBODE ]

Super-Earth discovered in habitable zone of sun-like star via TTV technique, paving way for 'Earth 2.0' searches - Phys.org

a photo is worth a thousand words.

One is “what exactly is in a ‘surge protector’ ? ”

the problem then depends on "how fast does the fuse operate?".

Will surging sea levels kill the Great Barrier Reef? Ancient coral fossils may hold the answer - The Conversation

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Can the fuse protect the electronic devices from lightning instead of a surge protector.

I post the exact comment here.

Experts Say Doing This 1 Thing Can Lower Your Risk Of Colon Cancer — And It’s Easier Than You Think - HuffPost

Because the load is inductive, the current lags the voltage.(by a bit).

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Why are the Chinese so sensitive to Western criticism?

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

[image of Common-mode choke]

First Sentence:

Astronomers Just Discovered One of the Fastest Jets Ever in a Radio-Quiet Galaxy - The Daily Galaxy

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

How can fashion design be used to make a political statement in popular culture, and society?

Barnstars:

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

This is 'the assistant's answer'

Where can I get sure fixed matches on Instagram?

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

The other is “what does a “fuse” do?”

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Do older men realize that younger women usually do not prefer them?

what exactly is a ‘surge’ protector?

At least they know the answer if they wanted it.

but this device (an Inductor) … impedes the rapid changes in the current.

Box Office: ‘Ballerina’ Arms Itself With $10.6 Million Opening Day, ‘Lilo & Stitch’ Gets Third Weekend on Top - Variety

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

He then asserts :

The bolt then partially travels down the line to your home.

Why do US military soldiers/officers have a chest full of medal ribbons when they probably haven't been in a combat situation? Are the medals for attendance, good behaviour, or long service perhaps?

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

A fuse is a non-resetable over current circuit protector.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

How do you leave a relationship when you are still in love?

These are simplified answers to the original question, and does not change anything I wrote above.

eight

2024–10–10[John johnson John Johnson ]

Now when you have a certain ac resistance, then a current flows in a loop.

At one ohm, the resistor has a maximum of 1 watt power.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

but I think this circuit , shows a few more pieces.

[old diagram got deleted by accident]

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

Here is a simplified AC power diagram.

One

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

so, what happens?

It seems Mohan does not understand the difference between a comment and an Answer.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Edit 2024–10.

What does a fuse do?

What is lightning?

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

But it can get overloaded, and no longer works.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

These devices are installed between the “hot” and “neutral” and protective ground.

Upvotes:

(Dc diagram shown, AC is similar).

He then describes the function of a fuse.

In schematic diagrams this is the symbol for a fuse:

This device then solves the entire problem.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

There are two important concepts here.

He then describes Rainy Season and Lightning.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

An AC voltage/ current source, and an ac inductive load.

This is where the MOV conducts again, and dissipated the energy.

A circuit breaker is similar, but is resettable.

For this case there are devices called Metal oxide varistors (MOV).

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

This one hit behind the barn.

But… the neutral is now “floating” because of the 1 ohm resistance.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.